Ламинатор FY 1700S
Описание
- Вал с пневматичен механизъм за затягане шпулата. Радиусът на вала се настройва в зависимост от радиуса на шпулата
- 1000W серво мотор за прецизно и плавно управление на скоростта
- Валът за зареждане на ролката е на панта и позволява бърза смяна на медиите
- Система за рязане на медията с фина настройка на ножовете
Характеристики
Спецификация
| Model | FY-1700S |
| Max. Laminating Width | 1700mm |
| Max. Laminating Thickness | 50mm |
| Max. Laminating Speed | 50m/min |
| Max. Laminating Temperature | 125°C |
| Max. Loading Diameter | 250mm |
| Max. Finished Rolling Diameter | 300mm |
| Max. Film Loading Diameter | 300mm |
| Roller Pressure Adjustment Range | 700N~7000N |
| Roller Parameters | High temperature resistant silicone rollers |
| Driving Motor | 1000W servo Motor |
| Roller Lifting Method | Pneumatic cylinder linkage lifting |
| Heating regulation | Available |
| Feed monitoring (paperless self-stop) | Available |
| Film carrier shaft tension control | Available |
| Gas riser shaft | 3 positions: film-carrying shaft, prints shaft, finished shaft |
| Air shaft opening and closing Method | Single side pull open/close |
| Automatic inflatable & drop lock function | Available |
| Air pump installation method | External silent oil-free air compressor |
| Net weight | 880kgs |
| Cutting System Category | Auxiliary brush cutting device |
| Cutting left and right fine adjustment | Hand wheel adjustment |
| Tabletop suction system (auxiliary installation prints) | Available |
| Metre counting function | Available |
| Quick Deceleration Button | Available |
| Double-position foot switch | Available (both front&rear pedal are double-position pedal) |
| Rear control panel | Available |
| Power Rating | 3500W |
| Rated voltage | AC200~240V 50/60Hz |
| Rated Current | 14~18A |
